Quote Line: 775-323-7542

PRC-DeSoto International Electrical Potting & Molding Compounds

Product Number Information
PR-420 Primer to enhance coupling characteristics of PR-1500 series polyurethane potting compounds to metal surfaces
PR-421 Discontinued product
PR-423 Discontinued product
P/S 727-2 Discontinued product – See PR-1460 Q
PR-1201 Q Discontinued product – See PR-1460 Q
PR-1460-Q Fuel Resistant Polysulfide Potting & Molding Compound -70°F (-57°C) to 250°F (121°C) Durometer A 40
PR-1500 Potting/Molding Application Guide
PR-1523-M Adhesion promoter to enhance the coupling characteristic of polyurethane compounds to neoprene surfaces
PR-1535 High Hardness Potting & Molding Compound. -80°F (-62°C) to 300°F (149°C) Durometer A 90 PR-1535 is tested in accordance with PRC DeSoto International and MIL-S-8516 specification test methods
PR-1543 Adhesion promoter to enhance the coupling characteristics of polyurethane compounds to polyvinyl chloride insulation.
PR-1538 High Hardness Potting & Molding Compound. -70°F (-57°C) to 300°F (149°C) Durometer A 80 PR-1538 is tested in accordance with PRC DeSoto International and MIL-S-8516 specification test methods
PR-1547 High Hardness Potting and Molding Compound. -70°F (-57°C) to 300°F (149°C) Durometer A 80 PR-1547 is tested in accordance with PRC DeSoto International and MIL-M-24041 & MIL-S-8516 specification test methods.
PR-1564 Low Viscosity, Medium Hardness Potting & Molding Compound -80°F (-62°C) to 275°F (135°C) Durometer A 65 PR-1564 is tested in accordance with PRC DeSoto International and MIL-S-8516 specification test methods
PR-1570 Medium Hardness Potting & Molding Compound. -80°F (-62°C) to 300°F (149°C) Durometer A 75 PR-1570 is tested in accordance with PRC DeSoto International and MIL-S-8516 specification test methods
PR-1574 High Hardness Potting & Molding Compound. -80°F (-62°C) to 300°F (149°C) Durometer A 90 PR-1574 is tested in accordance with PRC DeSoto International and MIL-M-24041 & MIL-S-8516 specification test methods.
PR-1590 Medium Hardness Potting & Molding Compound. -80°F (-62°C) to 300°F (149°C) Durometer A 75 PR-1590 tested in accordance with PRC DeSoto International and MIL-S-8516 specification test methods
PR-1592 High Hardness Potting & Molding Compound. -70°F (-57°C) to 300°F (149°C) Durometer A 85 PR-1592 is tested in accordance with PRC DeSoto International and MIL-M-24041 & MIL-S-8516 specification test methods.

Note: All PR-1500 series products are two-part, chemically curing polyurethane compounds.

For more information about these products contact Bergdahl Associates, Inc.

We pride ourselves in providing the best possible buying process and customer service in the entire industry.

From the very first phone call, all the way up to placing your first order with us, our team goes the extra mile to make sure everything is in place, so you can confidently make your purchase with us and have it delivered accurately and on time.

Contact us today so we can have the opportunity to serve you!

Product Partners

Techcon™ Systems

Fluid dispensing solutions providing an alternate source for many of your current Semco® products.

PRC-DeSoto Products

Aircraft fuel tank, fuselage, windshield, conductive and specialty sealants, industrial sealants and adhesives.

Semco® Packaging and Application Systems

Innovative, clean, safe, and accurate packaging and dispensing solutions for single-and multi-component adhesives, sealants, encapsulants, coatings and lubricants.

RPM Technology

Products for the removal of polysulfide (fuel tank) sealants and silicone sealants.

eOx Cleaners

Aqueous based aircraft and industrial cleaners.

Sealant Removal Wipes

Water wetted wipes for the removal of uncured sealants and adhesives.

Glue Dots

Removable adhesive dots in a convenient dispenser box.

Helpful Information

Information about application of sealants and adhesives.

Bergdahl Associates Inc, A Women-Owned Small Business, © 2024 All Rights Reserved
Quote Line: 775-323-7542 | Fax: 775-323-7595
Accepted Payment Types